Using The Input/Output Menu; Selecting An Output Signal (Input/Output) - Sony KP-53XBR4CT Manual De Instrucciones

Using the INPUT/
OUTPUT menu
Selecting an output signal (INPUT/
OUTPUT)
You can select an output signal from the SELECT OUT
jacks at the rear of the projection TV.
TV/VIDEO
1
4
7
1
Press MENU.
2
Press the joystick up or down to select
INPUT/OUTPUT and click the joystick.
3
Select MONITOR OUT, EDIT OUT or TV OUT.
Select To
MONITOR OUT Output the signal of the picture
displayed on the projection TV screen.
Use this option to edit tapes while
monitoring.
EDIT OUT Output the signal input to the
projection TV regardless of the
displayed picture on the screen.
Use this option to edit tapes while
watching an input image different
from that being recorded.
TV OUT Output the TV signal.
Use this option when you connect an
AV receiver to the VIDEO 1 IN jacks.
2 3
5 6
8 9
0
MENU
Joystick
2 OUT
VIDEO
MONITOR OUT
EDIT OUT
AUDIO
TV OUT
PROG
PALETTE
INPUT
VCR
OUTPUT
VIDEO LABEL
TIMER
SET UP
Use RETURN Exit MENU
To select MONITOR OUT:
(1) Make sure the cursor is beside MONITOR OUT
and click the joystick.
(2) Press TV/VIDEO to select the input to the
projection TV and click the joystick.
TV/VIDEO
To select EDIT OUT:
(1) Press the joystick up or down to select EDIT
OUT and click the joystick.
(2) Press the joystick up or down to select the input
to be edited and click the joystick.
To select TV OUT:
(1) Press the joystick up or down to select TV OUT
and click the joystick.
"Set up using only VIDEO1 input?" appears.
(2) If you connect only an AV receiver to your
projection TV, press the joystick up or down to
select YES. Then click the joystick. You can
always select the signal from the receiver by
pressing TV/VIDEO once.
If you connect your audio/video equipment to
the projection TV, select NO. You can select any
of the VIDEO 1 to VIDEO 5 inputs with the TV/
VIDEO button.
Notes
• When you set INPUT/OUTPUT to TV OUT, you cannot swap
the main/right and window/left pictures.
• The SELECT OUT signal is only available when the projection
TV is on.
VIDEO 2 OUT
VIDEO
MONITOR OUT
EDIT OUT
AUDIO
TV OUT
PROG
PALETTE
INPUT VCR
OUTPUT
TIMER VIDEO LABEL
SET UP
Use RETURN Exit MENU
IN
VIDEO 1
OUT
VIDEO
VIDEO 2 MONITOR OUT
VIDEO 3 EDIT OUT
AUDIO
VIDEO 4 TV OUT
PROG
VIDEO 5
PALETTE
INPUT VCR
OUTPUT
TIMER VIDEO LABEL
SET UP
Use RETURN Exit MENU
IN
OUT
VIDEO
MONITOR OUT
EDIT OUT
AUDIO
TV OUT
Set up using
PROG
only VIDEO1
PALETTE
input?
INPUT
VCR
YES
OUTPUT
NO
TIMER VIDEO LABEL
SET UP
Use RETURN Exit MENU
-EN
29
Operations
EN