DeWalt DCD790 Traducido De Las Instrucciones Originales página 18

EnGLIsH
BRUSHLESS CORDLESS COMPACT 13 mm
DRILL/DRIVER/IMPACT DRILL
DCD790, DCD795
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
No-load speed
1st gear
2nd gear
Impact rate
1st gear
2nd gear
Max. torque (hard/soft)
Chuck capacity
Maximum drilling capacity
Wood
Metal
Masonry
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841-2-1:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
Drilling into metal
Vibration emission value a
h,D
Uncertainty K =
Drilling into concrete
Vibration emission value a
h,ID
Uncertainty K =
Screwdriving
Vibration emission value a
h,D
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
18
WALT one of the
e
DCD790
V 18
DC
3/12
Li-Ion
min -1 0–600
min -1 0–2000
min -1 –
min -1 –
Nm 60/23
mm 1.5–13.0
mm 38
mm 13
mm –
kg 1.20
dB(A) 69
dB(A) 80
dB(A) 5
= m/s 2 2.6
m/s 2 1.5
2
= m/s –
2
m/s –
2
= m/s <2.5
2
m/s 1.5

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However if the
tool is used for different applications, with different accessories or
poorly maintained, the vibration and/or noise emission may differ.
This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration and/or
DCD795
noise should also take into account the times when the tool is
18
switched off or when it is running but not actually doing the job.
3/12
This may significantly reduce the exposure level over the total
working period.
Li-Ion
Identify additional safety measures to protect the operator from
the effects of vibration and/or noise such as: maintain the tool
0–600
and the accessories, keep the hands warm (relevant for vibration),
0–2000
organisation of work patterns.
EC‑Declaration of Conformity
0–10200
Machinery Directive
0–34000
60/23
1.5–13.0
Drill/Driver/Impact Drill
38
DCD790, DCD795
13
D WALT declares that these products described under
e
Technical Data are in compliance with:
13
2006/42/EC, EN62841-1:2015+AC:2015, EN62841-2-1:2018
1.27
+A11:2019.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
90
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
101
3
3.1
Markus Rompel
1.5
Vice-President Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
65510, Idstein, Germany
14
29.11.2021
1.7
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY) REGULATIONS
<2.5
1.5
WALT at
e
WALT.
e
2008