Siemens SIMATIC ET 200AL Manual De Sistema página 913

Comunicación OPC UA
9.3 Uso de la CPU S7-1500 como servidor OPC UA
Número de Nombre
error (hex)
80710000 BadHistoryOperationInvalid
80720000 BadHistoryOperation
Unsupported
80730000 BadWriteNotSupported
80740000 BadTypeMismatch
80750000 BadMethodInvalid
80760000 BadArgumentsMissing
80770000 BadTooManySubscriptions
80780000 BadTooManyPublish
Requests
80790000 BadNoSubscription
807A0000 BadSequenceNumber
Unknown
807B0000 BadMessageNotAvailable
807C0000 BadInsufficientClientProfile
80BF0000 BadStateNotActive
807D0000 BadTcpServerTooBusy
807E0000 BadTcpMessageTypeInvalid
807F0000 BadTcpSecureChannel
Unknown
80800000 BadTcpMessageTooLarge
80810000 BadTcpNotEnough
Resources
80820000 BadTcpInternalError
80830000 BadTcpEndpointUrlInvalid
80840000 BadRequestInterrupted
80850000 BadRequestTimeout
80860000 BadSecureChannelClosed
80870000 BadSecureChannelToken
Unknown
80880000 BadSequenceNumberInvalid The sequence number is not valid.
80890000 BadConfigurationError
808A0000 BadNotConnected
808B0000 BadDeviceFailure
808C0000 BadSensorFailure
808D0000 BadOutOfService
214
Estado "Bad" (8000_0000 - FFFF_FFFF)
Significado
The history details parameter is not valid.
The server does not support the requested operation.
The server not does support writing the combination of value, status and
timestamps provided.
The value supplied for the attribute is not of the same type as the attribute's
value.
The method id does not refer to a method for the specified object.
The client did not specify all of the input arguments for the method.
The server has reached its maximum number of subscriptions.
The server has reached the maximum number of queued publish requests.
There is no subscription available for this session.
The sequence number is unknown to the server.
The requested notification message is no longer available.
The Client of the current Session does not support one or more Profiles that
are necessary for the Subscription.
The sub-state machine is not currently active.
The server cannot process the request because it is too busy.
The type of the message specified in the header invalid.
The SecureChannelId and/or TokenId are not currently in use.
The size of the message specified in the header is too large.
There are not enough resources to process the request.
An internal error occurred.
The Server does not recognize the QueryString specified.
The request could not be sent because of a network interruption.
Timeout occurred while processing the request.
The secure channel has been closed.
The token has expired or is not recognized.
There is a problem with the configuration that affects the usefulness of the
value.
The variable should receive its value from another variable, but has never
been configured to do so.
There has been a failure in the device/data source that generates the value
that has affected the value.
There has been a failure in the sensor from which the value is derived by the
device/data source.
The source of the data is not operational.
Manual de funciones, 12/2017, A5E03735817-AF
Comunicación