Siemens SIMATIC ET 200AL Manual De Sistema página 915

Comunicación OPC UA
9.3 Uso de la CPU S7-1500 como servidor OPC UA
Número de Nombre
error (hex)
80C30000 BadFilterOperandCount
Mismatch
80C40000 BadFilterElementInvalid
80C50000 BadFilterLiteralInvalid
80C60000 BadIdentityChangeNotSup-
ported
80C80000 BadNotTypeDefinition
80C90000 BadViewTimestampInvalid
80CA0000 BadViewParameterMismatch The view parameters are not consistent with each other.
80CB0000 BadViewVersionInvalid
80CC0000 BadConditionAlready
Enabled
80CD0000 BadDialogNotActive
80CE0000 BadDialogResponseInvalid
80CF0000 BadConditionBranch
AlreadyAcked
80D00000 BadConditionBranch
AlreadyConfirmed
80D10000 BadConditionAlreadyShel-
ved
80D20000 BadConditionNotShelved
80D30000 BadShelvingTimeOutOfRan-
ge
80D40000 BadAggregateListMismatch
80D50000 BadAggregateNotSupported
80D60000 BadAggregateInvalidInputs
80DB0000 BadTooManyMonitoredItems The request could not be processed because there are too many monitored
80D70000 BadBoundNotFound
80D80000 BadBoundNotSupported
80DA0000 BadAggregateConfiguration
Rejected
80E10000 BadDominantValueChanged
80E30000 BadDependentValueChan-
ged
80E40000 BadRequestNotAllowed
80E50000 BadTooManyArguments
80E60000 BadSecurityModeInsufficient
810D0000 BadCertificateChainIncom-
plete
216
Estado "Bad" (8000_0000 - FFFF_FFFF)
Significado
The number of operands provided for the filter operator was less than ex-
pected for the operand provided.
The referenced element is not a valid element in the content filter.
The referenced literal is not a valid value.
The Server does not support changing the user identity assigned to the
session.
The provided Nodeid was not a type definition nodeid.
The view timestamp is not available or not supported.
The view version is not available or not supported.
This condition has already been enabled.
The dialog condition is not active.
The response is not valid for the dialog.
The condition branch has already been acknowledged.
The condition branch has already been confirmed.
The condition has already been shelved.
The condition is not currently shelved.
The shelving time not within an acceptable range.
The requested number of Aggregates does not match the requested number
of NodeIds.
The requested Aggregate is not support by the server.
The aggregate value could not be derived due to invalid data inputs.
items in the subscription.
No data found to provide upper or lower bound value.
The server cannot retrieve a bound for the variable.
The aggregate configuration is not valid for specified node.
The related EngineeringUnit has been changed but this change has not
been applied to the device. The Variable Value is still dependent on the
previous unit but its status is currently bad.
A dependent value has been changed but the change has not been applied
to the device. The quality of the dominant variable is bad.
The request was rejected by the server because it did not meet the criteria
set by the server.
Too many arguments were provided.
The operation is not permitted over the current secure channel.
The certificate chain is incomplete.
Manual de funciones, 12/2017, A5E03735817-AF
Comunicación