Publicidad
Idiomas disponibles
Idiomas disponibles
•
The device was tested according EN ISO 20957-1, class H. it is intended for home use only. The device
is designed for a maximum user weight of 150 kg load. The maximum load for the leg curl is 45 kg. The
maximum weight for the barbell bracket is 120 kg.
•
The device is not suitable for therapeutic use.
•
To avoid back injuries, speclal cautlon is needed when lifting or moving the unit. Make use of technical lifting
systems or help.
•
Ensure that the training room is well ventilated.
•
The device is particularly suitable for training of the upper body, arm and leg muscles and improving overall
endurance and fat burning.
WARNING! Before beginning this or any exercise program, consuit your physician first. this
is especially important for individuals over the age of 35 or persons with pre-existing heaith
problems. Read all instructions before using we assume no responsibility for personal injury or
property damage sustained by or through the use of this product.
NOTE: FITFIU is not responsible or liable for any injury to the person or damage to property arising
from the wrong use of the equipment.
PRODUCT DESCRIPTION
PACKAGING CONTENT
Take a few moments to familiarize yourself with the specific parts hardware included with your product. Make sure
all the parts and hardware are included in the cartons and examine them for any damage that may have occurred in
transport. PLEASE NOTE: Sorne parts may be pre-assembled and pre-installed.
TOOL INCLUDED
Please see the muiti-function tool included with the packaging in
the drawing to the right.
NYLON LOCK SAFETY NUTS
it is only necessary to tighten the boits and nuts to "finger tight"
during the assembly process. This will make it easier to complete
certain steps by allowing more tolerance for all the parts to fit
properly.
Do not tighten all the nuts onto the boits securely until after you
have completed assembly of your product. Use wrenches, pliers, or
ratchet and sockets to tighten the boits and nuts. The Nylon Nut
should thread onto the Hex Boit until the end of the Hex Boit has
broken through the Nylon insert inside the Nut.
48
Publicidad
