Publicidad
Idiomas disponibles
Idiomas disponibles
Maximum chain speed / (savE), m/s
Radio frequency data for Bluetooth
Frequency band, GHz
Output power, max dBm 0
Recommended cutting equipment
A specific chainsaw model has to be evaluated with
the cutting equipment to be recommended and fulfill the
requirements in ANSI B175.1-2021 (Internal Combustion
Engine-Powered Hand-Held Chainsaws - Safety and
Environmental Requirements) and Canadian Standards
CSA Z62.1-15 (Chainsaws) and CSA Z62.3-11 (R2016)
(Chainsaw kickback).
Chainsaw models Husqvarna T542i XP, T542i XPG
met the safety requirements in ANSI B175.1-2021
and Canadian Standards Association CSA Z62.1-15
(Chainsaws) and CSA Z62.3-11 (R2016) (Chainsaw
kickback), when equipped with the below listed saw
chain and guide bar combination(s).
Note:
Other chainsaw models may not meet the
kickback requirements when equipped with the listed
guide bar and saw chain combinations.
Guide bar
Length, in
Chain pitch, in
12
0.325 mini
14
16
Filing equipment and filing angles
Using Husqvarna file gauge will give you the correct
filing angles. We recommend you to always use a
Husqvarna file gauge to restore the sharpness of the
28
®
Accessories
Gauge, in
Max. nose ra-
dius
0.043
8T
T542i XP
24 (18)
2.4-2.4835
0
We recommend only to use the listed guide bar and saw
chain combinations.
Kickback information
The guide bar nose radius is determined by either the
maximum number of teeth in the nose sprocket or the
corresponding maximum nose radius of a solid bar.
As we are listing the maximum guide bar nose radius,
you may use a guide bar with smaller nose radius
than in our list. For guide bars of the same length, all
sprocket-nose guide bars of the same pitch and having
the same number of sprocket teeth may be considered
to have equivalent kickback energy.
The following cutting equipment is approved for the
models Husqvarna T542i XP.
Saw chain
Type
Husqvarna
SP21G
saw chain. The part numbers are given in the table
below.
If you do not know which saw chain you have on your
product, turn to your servicing dealer.
T542i XPG
24 (18)
2.4-2.4835
0
Length, drive
Low kickback
links (no.)
51
Yes
59
64
2120 - 006 - 09.10.2023
Publicidad
