Publicidad
Idiomas disponibles
Idiomas disponibles
indicator shows a solid light, speak to your servicing
dealer.
For more information about the user interface, refer to
Product overview on page 2 .
The automatic stop function
The product has an automatic stop function that stops
the product if you do not use it for 3 minutes.
Note:
If the chain brake is engaged, the product stays
on for 30 minutes.
Chain brake and front hand guard
Your product has a chain brake that stops the saw chain
if you get a kickback. The chain brake decreases the
risk of accidents but only you can prevent them.
WARNING:
where there is a risk of kickback. Be careful
when you use your product and make sure
that the kickback zone of the guide bar does
not touch an object.
The chain brake engages manually by your left hand or
automatically by the inertia release mechanism. Push
the front hand guard forward to engage the chain
brake manually. This movement starts a spring-loaded
mechanism that stops the drive sprocket.
Pull the front hand guard rearward to disengage the
chain brake.
2120 - 006 - 09.10.2023
Do not engage in situations
How the chain brake is engaged is in relation to the
force of the kickback and the position of the product. If
you get an intense kickback while the kickback zone is
farthest away from you, the chain brake engages by the
inertia release. If the kickback is small or the kickback
zone is nearer you, the chain brake engages manually
by your left hand.
Use the chain brake as a parking brake when you
start the product and when you move short distances.
This decreases the risk that you or a person near you
touches the saw chain.
A kickback can be very sudden and intense. Most
kickbacks are small and do not always engage the chain
9
Publicidad
