Publicidad
Idiomas disponibles
Idiomas disponibles
7. Indicator for heat in the handles
8. Warning indicator
9. Information and warning decal
10. Top handle
11. Belt eyelet
12. Rope eyelet
13. Fan housing
14. Front handle
15. Chain oil tank
16. Power trigger lockout
17. Power trigger
18. Oil adjustment screw
19. Spiked bumper
20. Bar tip sprocket
21. Saw chain
22. Guide bar
23. Chain catcher
24. Chain tensioning screw
25. Drive sprocket cover
26. Guide bar cover
27. Indicator for state of charge
28. Warning indicator
29. Power cord
30. Combination wrench
31. Battery charger (accessory)
32. Button, battery status
33. Battery status
34. Warning indicator
35. Battery release button
36. Battery (accessory)
37. Operator's manual
Symbols on the product
Risk of serious injury or death to the
operator or others. Be careful and use
the product correctly. Read the operator's
manual carefully and understand the
instructions before operation of the
product.
Use approved protective helmet, hearing
protection and eye protection.
Use approved protection for feet, legs,
hands and arms.
2120 - 006 - 09.10.2023
Use 2 hands when you operate the
product.
Do not operate the product with 1 hand
only.
Do not let the guide bar tip touch an
object.
Warning! Kickback can occur when the
guide bar tip touches an object. This
causes the guide bar to be thrown in the
direction of the operator. Risk of serious
injury or death.
Chain brake, engaged (right). Chain
brake, disengaged (left).
Indication of chain direction.
Maximum length of the guide bar.
L-Max
XX mm / XX"
Chain oil.
Rated voltage, V.
Direct current.
Protected against splashing water.
Recommended cutting equipment in this
Husqvarna HXX
example: Bar length 14 in (356 mm),
max. nose radius 9 Teeth, chain type
XX mm/XX
Husqvarna H38.
Measured maximum kickback value
XX
without triggering the brake, for the bar
and chain combination on the label.
3
Publicidad
