Urmet iPerCom Mikra Plus Manual De Instalación página 13

10. TECHNICAL SPECIFICATIONS
Power voltage POE: ..................................................................................................................... 44 ÷ 57 V
Stand-by consumption: ................................................................................................................. max 50 mA
Max. consumption (video call in progress and name tags on): .................................................. max 250 mA
Hold current terminals SE+, SE- : ..........................................................................................................25 mA
Maximum potential free NO contact: ...........................................................................max 200 mA @ 30 V
Degree of protection of casings: ...............................................................................................................IP65
Degree of protection from mechanical shocks: ........................................................................................IK07
LAN maximum operating distance: .............................................................. 100 m with CAT5/CAT5E cable
Working temperature range:................................................................................................... -5 °C ÷ + 45 °C
Dimensions (LxHxP): ........................................................................................................... 99 x 200 x 26 mm
Max. distance from hall button: ............................................ 25 m with cable cross-section area 0,5 mm
Max. distance from open door sensor: ................................ 50 m with cable cross-section area 1,5 mm
Max. distance from capacitance lock: ............................... 100 m with cable cross-section area 1,5 mm
15.105 Information to the user statements:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could
avoid the user's authority to operate the equipment.
DS1060-193
2
2
2
13