Publicidad
Idiomas disponibles
Idiomas disponibles
PROBLEM
The straps do not
work forward
Excess heat
accumulates in
the transmission
/ tine area during
ploughing
NOTE: In the event of not being able to resolve the problem, get in touch with an Authorised
Service Centre.
STORAGE
PREPARATION FOR STORAGE
Follow the steps below to prepare your motor hoe for storage.
1.
Protect wheels and axles from rust.
2.
Drain the fuel system completely according to the engine manufacturer's instructions or add fuel to prevent
it from freezing during storage.
3.
While the engine is still warm, drain the engine oil. Top up with the recommended oil.
4.
Clean exterior, motor and cooling fan.
5.
Remove the spark plug, pour SAE 30 oil into the spark plug hole.
6.
Pull the starter rope slowly to distribute the oil over the entire area.
7.
Replace the spark plug.
8.
Transport the machine to a suitable location. If you have chosen to use a stabilizing fuel and the fuel system
has not been drained, follow all safety instructions and storage precautions to prevent the possibility of fire
or inhalation of gasoline fumes. Remember that gasoline vapors are highly flammable.
9.
If there is any possibility of unauthorized use or tampering with the machine, remove the spark plug and
store it in a safe place before storing the motor hoe.
RECICLYING AND DISPOSING
When you decide to get rid of the machine, make sure to follow the local regulation.
Please help us to protect the environment and to preserve natural resources.
Get rid of the machine taking care of the environment. Do not simply throw it away in the domestic bin. Please
separate plastic and steel to recycle. Take this device to an authorised recycling centre. (Green point)
Petrol, used oil, oil/petrol mixtures, as well as objects stained with petrol (e.g.: cloths) must not be disposed of into the
domestic waste, pipes, soil, rivers, lakes or the sea. All objects stained with oil must be disposed of according to the
local regulations: take it to the most suitable recycling centre.
Package materials are recyclables. Please, throw them away on the appropriate rubbish bin.
•
Adjust the belt tension pulleys
•
Turn off the engine and let it cool down
•
Disconnect the spark plug wire
•
Pull down the safety control levers
•
Replace the spark plug strap and cable
•
Remove vegetation as instructed
•
FOLLOW ALL SAFETY INSTRUCTIONS
•
Check transmission fluid and refill if necessary.
SOLUTION
61
EN
Publicidad
