Publicidad
The period during which household furniture is in good condition and retains a presentable appearance
depends on the conditions of use.
By adhering to the simple rules described below, you will be able to keep all the parts of your furniture
in the best possible condition.
1. USE THE FURNITURE ONLY FOR THE INTENDED PURPOSE
• The chair is designed for one person.
2. PERMISSIBLE LOADS
• The furniture must only be used for its intended purpose.
• The maximum evenly distributed load on the folded/ unfolded chair or chair-bed is 100 kg.
3. GETTING READY FOR USE
• After storage and transportation at temperatures below +5°C, the furniture must be kept at room
temperature before use.
• Bear in mind that it is better to entrust the assembly process to professionals. If you assemble the
furniture yourself, make sure to read the assembly guidelines included in the package and follow them
at all points.
• Sealed packaging protects the furniture from external factors (getting dirty) and preserves the
production smell of a new product (as with any new item). After removing the packaging and assembling
the furniture, it is necessary to air it for at least 1 week.
4. CONDITIONS FOR STORAGE AND USE
• You can store furniture in closed warehouses at a temperature of +2°C and a humidity level of 45% to
70%.
• During transportation, storage and use, avoid the contact of the furniture (including furniture
elements that come into contact with the floor) with water and other liquids.
• The furniture is intended for use only in closed, heated rooms at temperatures from +15°С to +25°С
with an optimum air humidity of 45%-70%. Furniture sets that have been used outdoors or in abnormal
temperature conditions are not covered by the warranty.
• Place furniture on a flat, hard floor.
• Prolonged exposure to direct sunlight on furniture may cause fading. In the case of replacement and /
or addition of sections, these sections may differ in color.
• Heating parts of furniture over 40 °C is not allowed.
• Do not place hot objects on furniture surfaces.
• The structural elements of the furniture are not designed for extreme loads: pressure, strong frontal
impacts, etc.
• Packing and location of furniture during storage and operation should not create pressure that can
lead to deformation of soft furniture elements. Use furniture on a solid, flat, level surface against a wall
or other vertical support.
• Furniture should be installed at least 50-70 cm away from heaters and protected from heat.
5. FURNITURE CARE AND CLEANING
• To remove dust from surfaces, use a dry soft cloth (flannel, calico). It is not allowed to use soda,
washing powders, abrasive pastes and other products that are not intended for furniture care.
• It is recommended from time to time (once every six months) to check the tightening of bolted and
screw connections and, if necessary, tighten them.
Publicidad
