Publicidad
• Protect furniture from stains and dirt. Remove the resulting stain as quickly as possible before drying,
by blotting it with a clean, dry cloth. If necessary, moisten with a mild soap solution or upholstery
cleaner. Remove any remaining water from the furniture surface immediately with a soft cloth. Before
cleaning, test the selected product on a sample of the upholstery fabric included in the documentation
kit, or on a small, inconspicuous area of the fabric on the product.
• Do not iron pile fabrics, use only brushes with soft bristles to comb the pile.
• Stubborn dirt should be removed with special cleaners. Follow the cleaner manufacturer's instructions
for how and where to use them.
• Do not use aggressive liquids (acids, alkalis, oils, solvents, etc.). Such substances are active reagents:
interaction with them leads to negative consequences for furniture.
• Do not use hard tools for cleaning (scrapers, sponges with a working coating of plastic or metal fibre
material)!
6. SAFETY PRECAUTIONS
• Install and use furniture on a level surface. This will avoid falling and deformation.
• Never use furniture for other purposes, or exceed the permissible load on shelves and drawers.
• Never stand up, jump, walk on furniture, climb and sit on shelves, drawers, hang on doors and bars.
This rule applies to both adults and children.
• Never place hot, damp, dirty things and objects with sharp and cutting edges on the surface of the
furniture. Never throw objects on furniture, especially on glass surfaces.
• Never pull, drag and move furniture when loaded.
• Never pull, move and turn over the sofa, chair-bed, chair by the armrests, holding on to the drawers
and soft elements.
•
ATTENTION! Contact between the surface of furniture and naked skin can adversely affect the
appearance of eco-leather or furniture fabric due to natural skin exudates.
7. WARRANTY
Conditions for granting a manufacturer's warranty for the goods:
• the requirements for the operation and maintenance of furniture, assembly instructions are followed.
• No mechanical damage, traces of self-repair.
• Furniture is used for its intended purpose, not used for commercial purposes without permission for
commercial use.
• The packaging of the goods is preserved until the end of the assembly or the moment of detecting any
damage to the furniture, missing parts or accessories. The damaged part must not show traces of
assembly. These measures are necessary to determine the cause of the defect.
If the following is kept in place:
• Marking labels of the manufacturer on the furniture.
• Documents confirming the purchase of furniture (retail contract of sale).
The following are not considered as manufacturing defects:
• Changes in product parts, as well as technologies that were used by the manufacturer to improve the
product, but did not affect the consumer properties of the product.
• Damage to the fabric upholstery of the goods: scratches, cuts, snags, stains and dirt, traces of cleaning,
seam breaks, decorative stitching that occurred after the acceptance and / or assembly of the goods.
• Minor differences in shades within two points, texture of upholstery materials in the furniture set. The
difference in the tint of the fabric on one product in different planes under different angles of view and
lighting.
• The occurrence of pellets on the upholstery fabric, lint jamming on chenille and velour, abrasions, as
well as the loss of the appearance of the furniture fabric and the shedding of the top layer of eco-leather
Publicidad
