MR TAPCON 230 Manual página 11

Explosion protection
Highly flammable or explosive gases, vapors and dusts can cause serious explo-
sions and fire.
– Do not install or operate the product in areas where a risk of explosion is
present.
Safety markings
Warning signs and safety information plates are safety markings on the prod-
uct. They are an important aspect of the safety concept.
– Observe all safety markings on the product.
– Make sure all safety markings on the product remain intact and legible.
– Replace safety markings that are damaged or missing.
Ambient conditions
To ensure reliable and safe operation, the product must only be operated under
the ambient conditions specified in the technical data.
– Observe the specified operating conditions and requirements for the installa-
tion location.
Modifications and conversions
Unauthorized or inappropriate changes to the product may lead to personal in-
jury, material damage and operational faults.
– Only modify the product after consultation with Maschinenfabrik Reinhausen
GmbH.
Spare parts
Spare parts not approved by Maschinenfabrik Reinhausen GmbH may lead to
physical injury, damage to the product and malfunctions.
– Only use spare parts that have been approved by Maschinenfabrik Rein-
hausen GmbH.
– Contact Maschinenfabrik Reinhausen GmbH.
2.4 Personnel qualification
The person responsible for assembly, commissioning, operation, maintenance
and inspection must ensure that the personnel are sufficiently qualified.
Electrically skilled person
The electrically skilled person has a technical qualification and therefore has the
required knowledge and experience, and is also conversant with the applicable
standards and regulations. The electrically skilled person is also proficient in the
following:
– Can identify potential dangers independently and is able to avoid them.
– Is able to perform work on electrical systems.
– Is specially trained for the working environment in which (s)he works.
– Must satisfy the requirements of the applicable statutory regulations for acci-
dent prevention.
Electrically trained persons
An electrically trained person receives instruction and guidance from an electri-
cally skilled person in relation to the tasks undertaken and the potential dangers
in the event of inappropriate handling as well as the protective devices and
safety measures. The electrically trained person works exclusively under the
guidance and supervision of an electrically skilled person.
7820658/06 EN Safety
11