Wiesenfield WIE-PM-1200B Manual De Instrucciones página 33

i) Do not use sharp and/or metal objects (e.g. a wire brush or metal spatula) as these may
damage the surface of the appliance material.
j) Do not clean the unit with acidic substances, medical products, diluents, fuel, oil or other
chemicals as this may cause damage to the device.
k) Regularly lubricate the machine according to the instructions.
Grinding a new matrix
IMPORTANT! The die is a consumable part - its service life is approx. 300 working
hours or 30 days (daily use for approx. 6 hours). The used element is not subject to
warranty. If the wear of one side of the matrix is 4 mm, it should be replaced with a
new one.
Before first use, a new matrix should be polished and cleaned by following the process described
below:
a) Prepare:
• 5 kg of flour or sawdust
• 5 kg of fine sand (optional)
1.5 liters of vegetable oil, used or contaminated
•
b) Mix all ingredients in a bucket until you achieve a uniform mixture as shown in the photo
below.
EN