Publicidad
Idiomas disponibles
Idiomas disponibles
GSM Installation
The GSM mode consists of a telephone connection between the alarm
and the user' s mobile phone.
This mode requires a SIM card capable of making phone calls and
sending SMS messages. It doesn't matter if you have data or not, the
alarm will not use it.
The card can be prepaid or contract, in case of prepaid, monitor the
balance and its expiration, since in case of running out of balance, the
alarm will remain incommunicado, and will not be able to notify you.
The SIM card must not be protected with a PIN. If you have a PIN lock
on startup, insert the card into a mobile phone, to disable the startup
pin.
Then insert the card in the alarm center and it will automatically
recognize it, you will know that the SIM is operative because the lines
that start the coverage will appear.
Configuration of alert numbers
Once the SIM is recognized, you must enter the telephone numbers to
which you want to be notified, both of alarm jumps and of events that
occur, for example when the system is armed or disarmed, or if there
is a power outage. electrical supply.
On the alarm panel, press «menu» and then press «phone», here you
can call a phone to check that the card is active, to enter the phones
press «configure» and enter your user code, by default 1234.
33
Publicidad
