Energeeks EG-AWG003 Guía De Instalación Rápida página 35

SMS Codes
You can activate or deactivate the alarm via SMS by sending one of
the following codes:
- away arm «Complete armed»
- stay arm «partial armed»
- disarm
The team only responds to messages sent from phones that are in
your contact list and that have the message option activated.
Basic functions
Enable/disable
- Arming: A complete arming of the system is activated, activating
all installed sensors, except sensors that are manually deactivated.
- Partial: The alarm is partially activated. Only sensors that are in
partial mode will be activated.
This configuration is designed, for example, to activate the alarm at
night while inside the house, since, in this case, we need the sensors
that cover the perimeter of the house to activate, but not the sensors
inside it.
- Disarm: Deactivates the alarm. All sensors will be disabled, except
sensors in always on mode.
«Disarmed»
35