Energeeks EG-AWG003 Guía De Instalación Rápida página 37

Sensor
Press sensor and you will enter the list of installed sensors. To add a
new sensor, press the «+» at the top. The system allows you to link four
types of sensors, each with the specific configuration for that type of
sensor, although this configuration can be customized.
- Input: Specific for door/window opening sensors (EG-SA003).
This sensor is activated by default both in full and partial arming,
respecting the alarm delay. It provides information on the status of
the sensor, to know at all times if a door is open, regardless of the
alarm status, and allows specific configurations for doors, such
as the activation of an entrance chime or an open door/window
reminder.
- Motion: This profile links motion sensors (EG-SM003). By default it
is configured only for full arming and not for partial arming. It can
be configured as silent so that it notifies both by application and by
phone call, but without the panel notifying or triggering the siren.
- SOS: I specify to link sensors that we need to notify even when the
alarm is deactivated. This mode is designed for smoke sensors,
flood sensors, or co2 sensors, among others.
- General: Allows the installation of a sensor of any type, when this
is not specific to the system, compatible with sensors from any
manufacturer, that work in 433Mhz radio frequency, of the ev1527
type.
37