Publicidad
Idiomas disponibles
Idiomas disponibles
Accessories
The system allows you to link different accessories, opening sensors,
motion sensors, remote controls or outdoor sirens, among others.
Supports up to 160 sensors and 6 remote controls.
To link a sensor, press «menu» on the alarm center and select
accessories. The system will ask you to enter the user code (default
1234), then select the type of accessory you want to install.
Select sensor to install sensors of any type, controller to install remote
controls, doorbell to install a wireless doorbell, keyboard to install an
external keyboard and siren to install an outdoor strobe siren.
After selecting the type of sensor you want to install and customize
its settings if necessary, press link and activate the sensor so that it is
recognized by the system.
The activation of a sensor consists of making it send the signal so
that it can be captured by the control panel. To activate a door sensor,
open the door or separate the actuator from the sensor, if it is not
installed, to activate a sensor. motion sensor, wave your hand in front
of it, or to activate a remote control, simply press any button.
In the installation of sensors, you can differentiate between four
options, depending on the type of sensor or the utility that is going
to be given to it.
36
Publicidad
