Garant GRIDLINE 914520 Manual De Instrucciones página 32

GARANT Roller cabinet and mobile workbench
de
5. Unlock again using the central locking function.
6. Repeat steps 1 to 5 for other drawers/pull-out shelves.
6.3.3. Drawers and pull-out shelf – relocation
bg
H
ü Drawer/pull-out shelf has been removed.
da
1. Push the slides in fully.
2. Lift the front part of the slide and remove the slide.
3. Working from above, insert the guide rail into the hole in the desired position.
en
6.3.4. Drawers and pull-out shelves – installation
1. Insert the drawer/pull-out shelf and push it in.
2. Repeat the process for other drawers/pull-out shelves.
fi
6.4. INSERTING THE L-BOXX® (ONLY ARTICLE NO. 914574, 914575)
J
fr
ü Using the parking brakes to lock the castors.
1. Place the L-BOXX® on the pull-out shelf so that it is flush with the front edge.
» The cover can be opened from the front.
it
CAUTION! Risk of tipping over. Load the pull-out shelves from the bottom upwards. Store heavy L-BOXX®
units on the bottom pull-out shelves. Comply with the load capacity and distributed load. Ensure an even dis-
hr
tributed load.
2. Press the L-BOXX® lightly against the pull-out shelf until the side locks engage.
7. Pushing roller cabinets and mobile workbenches
lt
CAUTION
Collisions with a roller cabinet or mobile workbench
nl
Crush hazard for the body in the event of collision with a roller cabinet or mobile workbench.
» Make sure the paths for movement and transport are clear.
» No persons must be present in the direction of travel.
no
1. Lock the drawers and optional side compartment.
2. Make sure the paths for movement and transport are clear.
pl
3. Release the parking brakes on both castors.
4. Push the roller cabinet or mobile workbench.
8. Maintenance
pt
8.1. ARTICLE NUMBERS EXCEPT ARTICLE NO. 971750
Do not use alcoholic, abrasive or solvent-based cleaning agents.
ro
Interval
Before each occasion of use
sv
Monthly
sk
If dirty
sl
es
In the event of damage to
the roller cabinet / Tool-
Truck / mobile workbench,
cs
components and accessories
hu
32
Maintenance work
Check roller cabinet / ToolTruck / mobile workbench for ex-
ternal damage.
Check all components and screw fastenings for tightness
and operation.
Remove external dust and dirt.
Check for damage and cracks.
Clean the outer surfaces, drawers, shelves and castors/
wheels using a suitable cleaning agent.
Clean the worktop with a damp cloth.
Block access to the roller cabinet / ToolTruck / mobile work-
bench and prevent use.
Have damaged components and accessories replaced im-
mediately.
Performed by
Trained person
Trained person
Trained person
Trained specialist for mechan-
ical work