TURNING BLADES ON WHILE DRIVING IN REVERSE
NOTICE: Mowing in reverse is not recommended.
WARNING: Use extreme caution when mowing in reverse. Always make sure no individuals come into the work area,
especially small children before and while mowing in reverse.
WARNING: The operator's field of vision could be limited when operating the tractor with the bagger kit attached.
Extreme caution and familiarity with the surroundings should always be taken into consideration before and while
mowing in reverse.
The blade motors can be turned on when driving in reverse, if desired.
To Activate (Enter) MOWING IN REVERSE (Fig. 21):
After each startup, the "
which means the blade motors could not be turned on when driving
in reverse.
a. Sit down on the tractor seat.
b. Press the start/stop button for 3s and the LCD screen will
displays operator interface.
c. Press the MOWING IN REVERSE button for 3s and the "
will disappear from the LCD screen, which means the blade
motors could be turned on when driving in reverse.
To Stop (Exit) MOWING IN REVERSE, you may choose one of the
four ways:
◾
Press the MOWING IN REVERSE button once.
◾
Raise yourself off the tractor seat.
◾
Press the start/stop button for 3s to turn off the LCD screen.
◾
Remove the safety key or remove the battery pack(s) to shut down the tractor.
NOTE: When the MOWING IN REVERSE is stopped, the "
46
56-VOLT LITHIUM-ION ELECTRIC LAWN TRACTOR — TR4200/TR4200-FC
" icon will illuminate on the LCD screen,
21
"
" icon will illuminate on the LCD screen.
>3s