Publicidad
Idiomas disponibles
Idiomas disponibles
LCD
Description
Display
CCS icon blinks
n/a
n/a
OFF
Charging Port Fault
FAULT CODE REFERENCE
Description
Left blade motor fails in rotation
Right blade motor fails in rotation
NOTICE: For any other fault codes appeared on the LCD screen, which may indicate PCBA failure, loosen connection,
motor failure of the driving motor, blade motors, etc., please remove all battery packs and re-insert them a few minutes
later to restart the tractor. If this doesn't solve the problem, please contact EGO customer service center and have repairs
performed by a qualified service technician.
72
56-VOLT LITHIUM-ION ELECTRIC LAWN TRACTOR — TR4200/TR4200-FC
Tractor
Audio
Status
Indicator
Indicator
OFF
No
Keeps
OFF
beeping
Solid RED
n/a
Solid RED
n/a
Fault Code on LCD Audio Indicator
509
One beep
609
One beep
Cause
Solution
The CCS (cruise
control system)
The CCS function could not be set when the tractor is
function has
driving at very low speed or is driving in reverse.
failed.
After the parking-brake pedal is released, press the
Parking-brake
CCS button and the CCS icon will illuminate on the
pedal is de-
LCD, or exit the CCS function following the
pressed to stop
instructions in the section "To Stop (Exit) Cruise
the tractor.
Control (CCS)".
The tractor is
parked on a slope
and the operator
leaves the tractor
Set the parking-brake pedal at the parking-brake
without setting
position. The parking-brake icon will illuminate and
the parking-brake
the sound indicator will stop beeping.
pedal at the
parking-brake
position.
There is no
Check the wall outlet whether there is 120V supplied
power supply.
or the socket is good.
Electronic faults,
such as the
charging port is
Please contact EGO customer service center and have
in open circuit,
repairs performed by a qualified service technician.
the fuse is blown,
etc.
Solution
Inspect the blade first. If it is loosened, use a 9/16 in
(14 mm) torque wrench (not supplied) to tighten the
bolt clockwise. The recommended torque for the blade
bolt is 36-41 ft-lb (50-55 Nm). Otherwise, contact EGO
customer service center and have repairs performed by
a qualified service technician.
Publicidad
