Publicidad
Idiomas disponibles
Idiomas disponibles
Powering ON
The instrument can be used in either a Self-levelling Mode
or Pendulum Locked Mode.
Power-ON in the Self-Levelling Mode:
In this mode, the laser level checks the horizontal position
and automatically self-aligns within the self-levelling range
of approx. ±3.5°.
1. Place the instrument on a hard and level surface.
2. If you use the tripod, stabilise it before mounting
the instrument on it.
3. Rotate the Pendulum Lock/Unlock Switch
UNLOCKED position to activate the laser beam.
NOTE:
If the instrument is tilted beyond its self-leveling limits (3.5°), it
will not level and will emit a beeping sound indicating an error.
Power-ON in the Pendulum Locked Mode:
In a Pendulum Locked Mode, the self-levelling capability is
disabled, and the laser level can be tilted to project a laser
beam at an incline.
Press the Power Button
the laser beam.
IMPORTANT! In this mode, the Pendulum Lock/Unlock
MUST ALWAYS be in the LOCKED position.
Switch
3
NOTE:
In any application where the instrument must be utilised in a
tilted position, power it on in the Pendulum Locked Mode only.
3
2
for three seconds to activate
21
3
to the
Publicidad
