Publicidad
Idiomas disponibles
Idiomas disponibles
3. To reposition the rolling receiver over the grade rod, squeeze
the two brake release pads
the two brake pads to lock the receiver onto the grade rod.
The receiver will remain secured on the grade rod.
To Dismantle and Store the Grade Rod
NOTE:
Always remove the receiver from the grade rod before
dismantling it.
1. Push the locking detents
35
of each subsection and pull
the parts apart slightly, remove
your finger from the detent and
pull the subsection apart.
2. Repeat this procedure for the
remaining subsections.
3. Stack the four subsections
together for storage.
21
and proceed. You may release
35
Publicidad
