Publicidad
Idiomas disponibles
Idiomas disponibles
4. ROLLING LASER RECEIVER
Installing the Batteries
The Battery Compartment
of the Receiver.
To Install Batteries
1. Pull back on the tab and partially lift the lid and pull
toward the top side of the instrument.
2. Noting battery polarity, insert 3 x AA alkaline batteries.
To Close Compartment Lid
1. Hold the Battery Compartment Lid
and slide it under the lower two rollers until the lid tabs
are in the compartment indentations.
2. Lower the lid and push it down to snap into place.
15
is located at the back
15
25
15
in a slant position,
Publicidad
