Publicidad
Idiomas disponibles
Idiomas disponibles
LED Indicators on the Control Panel
LED Indicator
Pendulum Lock/
Unlock Switch
Battery Condition
Laser Beam RPM
The 800 RPM speed LED Indicator
The 500 RPM
will not glow.
The instrument will be ready for use and the Pendulum
LOCKED Indicator
4
The instrument can be changed to Self-Levelling Mode
by rotating the Pendulum Lock/Unlock Switch
UNLOCKED position and wait for the instrument to self-align.
Powering OFF
1. Ensure the Pendulum Lock/Unlock Switch
LOCKED position.
2. Press and hold the Power Button
NOTE:
To save battery power, turn the instrument OFF when
not in use.
Setting
Locked
Unlocked
3
Sufficient run
capacity
Replace batteries
Replace batteries
immediately
800 RPM
(default speed)
500 RPM
(when selected)
200 RPM
(when selected)
7
and 200 RPM
4
will glow in RED.
6
will glow GREEN.
8
speed LED Indicators
2
for two seconds.
22
LED Light
Solid RED
OFF
Solid GREEN
Solid RED
Flashing RED
(flash every 2 sec)
Solid GREEN
Solid GREEN
Solid GREEN
3
to the
3
is in the
Publicidad
