Environmental Information - Sharp MX-C301 Manual De Instrucciones

Noise emission
Noise emission values
The following shows noise emission values as measured according
to ISO7779.
Sound power level L
WA d
Operating (continuous printing)
Standby mode (Low power level mode)
Sound pressure level L
pAm
Operating (continuous printing) Bystander positions
Standby mode Bystander positions
• Operating: with option MX-CS11.
• Standby: "-"=less than background noise.
Notice for users in Europe
Hereby, SHARP ELECTRONICS declares that this
Digital Full Colour Multifunction MX-C301/MX-C301W
is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
The declaration of conformity may be consulted at:
"http://www.sharp.de/doc/MX-C301W.pdf"
Supplies
Standard supplies for this product that can replaced by the user
include paper and toner cartridges.
Be sure to use only SHARP-specified products for the toner
cartridges and transparency film.
For best copying results, be sure to use only
Sharp Genuine Supplies which are designed,
engineered, and tested to maximize the life
and performance of Sharp products. Look
for the Genuine Supplies label on the toner
package.
GENUINE SUPPLIES
Storage of supplies
Proper storage
1. Store the supplies in a location that is:
• clean and dry,
• at a stable temperature,
• not exposed to direct sunlight.
2. Store paper in the wrapper and lying flat.
3. Paper stored in packages standing up or out of the wrapper may curl or
become damp, resulting in paper misfeeds.
Storing toner cartridges
Store a new toner cartridge box horizontally with the top side up. Do not store
a toner cartridge standing on end. If stored standing on end, the toner may not
distribute well even after shaking the cartridge vigorously, and will remain inside
the cartridge without flowing out.
• Store the toner in a location that is cooler than 104°F (40°C). Storage in a hot
location may cause the toner in the cartridge to solidify.
• Please use SHARP-recommended toner cartridges. If toner cartridges other than
SHARP-recommended toner cartridges are used, the machine may not attain full
quality and performance and there is a risk of damage to the machine.
Supply of spare parts and consumables
The supply of spare parts for repair of the machine is guaranteed for at least 7 years
following the termination of production. Spare parts are those parts of the machine
which may break down within the scope of the ordinary use of the product, whereas
those parts which normally exceed the life of the product are not to be considered as
spare parts. Consumables too, are available for 7 years following the termination of
production.
Information on Disposal
Information on the Disposal of this
Equipment and its Batteries
IF YOU WISH TO DISPOSE OF THIS EQUIPMENT, DO NOT
USE THE ORDINARY WASTE BIN, AND DO NOT PUT THEM
INTO A FIREPLACE!
7.1 B
Used electrical and electronic equipment and batteries
-
should always be collected and treated SEPARATELY in
accordance with local law.
Separate collection promotes an environment-friendly
treatment, recycling of materials, and minimizing final
55 dB
disposal of waste. IMPROPER DISPOSAL can be harmful
to human health and the environment due to certain
24 dB
substances! Take USED EQUIPMENT to a local, usually
municipal, collection facility, where available.
This equipment contains a BATTERY which cannot be
removed by the user. For battery exchange, please contact
your dealer.
If in doubt about disposal, contact your local authorities or dealer and ask for the
correct method of disposal.
ONLY FOR USERS IN THE EUROPEAN UNION, AND SOME OTHER COUNTRIES;
FOR INSTANCE NORWAY AND SWITZERLAND: Your participation in separate
collection is requested by law.
The symbol shown above appears on electrical and electronic equipment (or the
packaging) to remind the users of this.
If the equipment has been used for BUSINESS PURPOSES, please contact your
SHARP dealer who will inform you about take-back. You might be charged for the
costs arising from take-back. Small equipment (and small quantities) might be taken
back by your local collection facility. For Spain: Please contact the established
collection system or your local authority for take-back of your used products.

Environmental information

Please read this part carefully. It will help you to reduce your
impact on the environment and help you to reduce your costs at
the same time.
Saving paper
1. The automated duplex printing function is for printing both sides of paper
automatically without turning over the paper manually. If the machine is
equipped with the automated duplex printing function, set up your print
settings on your computer to automatically print double-sided. Please use the
automatic duplex printing function of this machine wherever possible.
2. By printing on recycled paper and thin 64g/m2 paper that meet the standard
EN12281:2002 and similar quality standards ,you can reduce the impact on
the environment.
Saving energy
1. This machine has an energy save mode for reducing power
largely. When the machine is not used for a certain period of time, the
machine switches to this less power-consuming mode. In this mode, the
power supplies of the operation panel and fusing unit are shut off. Thus the
power consumption can be reduced. The recovery time from this mode
requires more time than from the "ready mode". You can adjust the times the
machine switches to the energy save mode. For models with a power-save
button: If your next print would be later than the set time for the energy save
mode, we recommend to press the power-save button to activate the power
saving at once. For models with automated power management function
that adjusts itself to the usage pattern of the device, or also for models with
eco scan mode, we recommend the use of it in order to reduce the energy
consumption and save additional costs. These energy-saving functions are
described in detail in the operation manual.
2. This machine complies with the latest version of the International
Energy Star criteria. The "International Energy Star
voluntary registration scheme for energy-saving office
Cartridge disposal and treatment
Regarding your used Sharp toner cartridges and other consumables from Sharp
copiers/multifunctional machines, please observe that these waste products
shall be treated properly according to the legal requirements in your area.
We recommend to contact competent service providers (e.g. waste recycling
companies) for this, and to ask local authorities for support, when necessary.
For information on existing Sharp collection and recycling programs, which
exist in some countries, please see our website www.sharp.eu.
5
Users from PRIVATE
HOUSEHOLDS are
requested to use
existing return facilities
for used equipment.
Return is free of charge.
consumption
Programme" is a
devices.