Dimensions For Exaust Tube Connection And Air Suction; Connection Details - Lincar Betty 531 Manual Del Usuario - Mantenimiento

DIMENSIONS FOR EXAUST TUBE CONNECTION AND AIR SUCTION

Attention to stove model.
•
In case that it's necessary to hole in wall for exhaust fume, proceede as follows :
•
To measure and to draw with real dimension on the wall the points for stove
−
connection;
To realize the hole on the wall.
−
To connect the stove to the flue with the tube for exhaust fume.
−
In case that the exhaust tube has a connection position not horizontal (f.e.up
−
connection ) it's necessary to maintain a security distance of exhaust tube from wall
of 100 mm
Ducting system
tube Ø 100mm
Air Suction
Ø50 mm
Exhaust fumes
Ø 80mm
ASSEMBLY OF ADAPTER HOT AIR DUCT
Take off the adapter placed inside the stove.
•
Screw the screws standard on the square tube
•
section leaving the sufficient backlash
Place the adapter on the tube so that the two
•
folds with slot, are the screws, then tighten the
screws until it stops.
Betty Betty
Betty Betty
Mod. 531
Ducting system
tube Ø 100mm
Air Suction
Ø50 mm
Exhaust fumes
Ø 80mm
39/124
IT IT IT IT- - - - GB GB- - - - FR FR- - - - E E E E S S S S mod. 531 – 531N
GB GB FR FR
Alicya Alicya
Alicya Alicya
Mod. 531N