Monogram Z2V830 Instrucciones De Instalación página 11

Installation Instructions
INSTALLATION—VENTED TO THE OUTSIDE
CONNECT DUCTWORK
* Remove shipping tape from the damper.
¢ Install ductwork, making connections in the
direction of airflow as illustrated.
¢ Push duct over the exhaust outlet and damper.
¢ Secure joints in ductwork with sheet metal screws.
¢ Wrap all duct joints and the flange connections
with duct tape for an airtight seal.
Airflow
Duct tape ft |
over seam baa
and screw Screw
CAUTI O N: Do not use sheet metal screws
at the hood flange connection. Doing so will prevent
proper damper operation. Seal connection with
tape only.
11