Monogram Z2V830 Instrucciones De Instalación página 16

Installation Instructions
INSTALLATION—RECIRCULATING
SIZE AND CUT DUCT PIECE
* Hold upper air deflector
with duct connector
against the ceiling.
* Measure from the bottom
of the air deflector to the
top of the hood as shown.
Reduce that dimension by
1" to facilitate installation. |
The duct will cover
and overlap the deflector
and the hood outlets.
Measure Duct
length length
Deflector ¢ Cut the duct piece to size
and slip onto the bottom
of the deflector.
* Place the assembled deflector
and duct over the exhaust
outlet.
¢ Hold the assembly against
the duct bracket.
* Drive 2 screws into each side
of the bottom of the deflector
and into the bracket.
¢ Use duct tape to seal
duct to the deflector
and at the exhaust outlet.
16