ADE WS 2301 Instrucciones De Operación página 57

2. Manually restart the receiving process, see "Start-
ing signal reception manually".
3. Wait until the base station automatically switches
back to reception at a later time. The reception is
usually better at night.
4. Make settings manually if reception is not possible
at your location; see "Setting the time and date
manually".
No data display from the wireless outdoor sensor
1. Check that the batteries are inserted the right way
round.
2. Check whether the location of the wireless out-
door sensor is suitable; see "Choosing a location".
3. By default, transmission channel "1" is always used
for data transmission.
1. If necessary, briefly press the CH button
repeatedly until appears on the display.
2. Press and hold the CH button to manually
start signal reception by the outdoor sensor.
Weather station with wireless outdoor sensor WS 2301
57