Publicidad
Idiomas disponibles
Idiomas disponibles
BEFORE USE
Please check before use!
This product is for 120 V~, 60 Hz only.
Make sure to connect the power plug to a grounded
120 V~, 60 Hz outlet.
How to Install Filter
- Be sure to remove the packaging plastic wrapping before installing the filter.
- Use the filter indoors only.
- Unplug the power cord from the outlet when not using the product.
Tips
- Check the front of the filter when installing it.
▶ Filter assembly : Deodorization filter → Green True HEPA™ filter
1. Open the front cover.
Pull the top of the front cover to open it.
2. Take out the filter and remove the
packaging plastic wrapping.
Remove the packaging plastic from all filters
except the pre-filter and assemble the product
according to the filter assembly sequence.
∗ Filter assembly sequence : Deodorization filter →
3. Close the front cover.
Align the two projections on the bottom of the
front cover with the grooves and push in the
cover to fix it.
∗ The product will not operate if the front cover is
not fixed correctly.
Green True HEPA™ filter
▶
9
10
Publicidad
