Coway Airmega 160 Manual Del Usuario página 16

HOW TO CLEAN
- Always unplug the air purifier before cleaning.
- Do not use detergents that contain organic solvents (solvent, thinner, etc),
bleach, chlorine, or abrasives.
Tips
- Do not put the air purifier in water or spray water directly on it.
■ Cleaning the Air Quality sensor (every 2 months)
1. Clean the air quality sensor's air intake and outlet using a soft brush
or a vacuum cleaner.
2. Open the air quality sensor cover on the right-hand side of the product.
Wipe the lens, dust inlet, and dust outlet
with a dry cotton swab.
∗ Without regular cleaning, the performance of
the air quality sensor deteriorates.
∗ The cleaning cycle differs depending on the
operating environment. When using the
product in a dusty environment, clean the
sensor more often.
■ How to Clean Front Cover
Use a soft cloth or brush to wipe off the dust on the surface of
the front cover.
∗ Use a slightly wet cloth to wipe when contamination is high
(Do not use abrasive).
■ How to Clean Main Body of Product
Use a dry and soft cloth to wipe it.
∗ Use a slightly wet cloth to wipe when contamination is high
(Do not use abrasive).
Air outlet
Air inlet
Dust outlet
▶
Dust inlet