Set Time (Time); Cleaning - Seca 284 Manual De Instrucciones Y Garantía

Set time (Time)

8. CLEANING

You can configure the system so that the wireless
printer automatically adds the date and time to your
measured results. To do so, you have to set the date
and time once on the device and transmit this to the
wireless printer's internal clock.
NOTE
This function is only available if the "learn"
function has been used to integrate a
seca wireless printer in the wireless group.
1. Switch the device on.
2. Select the "Time" menu item from the "rf" submenu.
3. Confirm the selection.
The current setting for year (YEA) is displayed.
4. Select the correct year.
5. Confirm the selection.
6. Repeat steps 3. and 4. as appropriate for month
day
( ), day (
7. Confirm your selection each time.
After confirming your setting for minute, the
program automatically exits the menu.
The settings are automatically transmitted to the
wireless printer.
The wireless printer automatically adds the date
and time to every printout.
NOTE
For further operation of the wireless printer, see
its user manual.
Use a standard household cleaner or disinfectant to
clean the surfaces of the device as required. Take note
of the instructions provided by the manufacturer.
hour
), hour ( ) and minute (
English
).
Cleaning • 113