Enter Height Manually (Hght); Permanently Save Additional Weight (Pt) - Seca 284 Manual De Instrucciones Y Garantía

Enter height manually
Permanently save
additional weight (Pt)
96 •
5. Select the setting you require:
Duration
Brightness
6. Confirm your selection.
You will leave the menu automatically.
7. If you also wish to make settings for the second
function, repeat this process.
You can enter the patient's height manually - if the
(HGHt) head slide ever fails, for example.
1. Select the item "HGHT" (height) from the menu.
2. Confirm the selection.
The current setting flashes in the display.
3. You can either accept the set value or set a
different value using the arrow keys.
4. Confirm the set value.
The value is saved.
You will leave the menu automatically.
You can use the Pre-Tare function (Pt) to permanently
save an additional weight and to automatically deduct it
from a reading. You can, for example, save a flat-rate
figure as the weight of shoes and clothing and then
always deduct it from the measured result when a
patient is weighed fully dressed.
1. Select the item "Pt" from the menu.
The last additional weight to be set flashes in the
display.
"PT" appears in the display.
2. You can either accept the saved value or set a
different value using the arrow keys.
Function Setting
• Short (approx. 15 Sek.)
• Long (approx. 45 Sek.)
• Perm (permanent)
• 50%
• 100%
• OFF