Determine Body Fat Rate (Bfr) - Seca 284 Manual De Instrucciones Y Garantía

Determine Body Fat
Rate (BFR)
90 •
NOTE
If the "Autoclear" function is activated, height
and BFR are deleted automatically after 5
minutes (see "Delete values automatically (AClr)"
on page 94).
The Body Fat Rate puts height, weight and gender in
relation to one another. It includes a tolerance range
which is considered ideal in health terms.
1. Press the Start key
display and the head slide.
2. Ensure that the calculation method "BFR" is set on
the multifunctional display (see "Switch between
BMI and BFR (body)" on page 95)
3. Press the gender key to switch between "male"
and "female".
4. Ask the patient to step onto the measuring station.
The patient's weight is displayed.
5. Press the hold key.
The patient's weight is displayed continuously.
NOTE
If the Autohold function is activated, the weight
value is automatically displayed continuously as
soon as a stable measured result is achieved.
(see "Activate Autohold function (AHold)" on
page 97)
6. Measure the height of the patient using the head
slide (see "Start measuring height" on page 100).
7. Briefly press the Enter key send/print (see
"Transmit measured results to wireless receivers"
on page 102).
The height received is displayed on the
multifunctional display.
BFR is calculated and displayed automatically.
of the multifunctional