Epson EB-1410Wi Guia De Instalacion página 4

Place to Install the Setting Plate
Carry out the power supply wiring work for the installation location of the setting plate in advance.
Install the projector away from other electric devices such as fluorescent lights or air conditioners. Some
kinds of fluorescent lights could interfere with the remote control of the projector.
It is recommended to keep connection cable length less than 20 meters to reduce external noise.
We recommend using stick-on screens or board screens.
Make sure the projector is setup under the following conditions.
The projection screen is a rectangular shape without any distortion.
•
The projector is tilted at an angle of no more than ±3
•
projection surface.
By using the interactive function (Easy Interactive Function), you can make notes directly on the
projection surface with the Easy Interactive Pen. Set up so that the projection surface is within arms reach.
If multiple EB-1410Wi or EB-1400Wi are installed in the same room, Easy Interactive Pen operations may
become unstable. Set [Distance of Projectors] from the Configuration menu according to the distance
between the projectors.
s Projector's User's Guide "Configuration Menu"
About This Installation Guide
This guide describes how to mount the short-throw projector EB-1410Wi/1400Wi to a wall using the exclusive
setting plate.
°
vertically and horizontally in relation to the
4