Publicidad
Idiomas disponibles
Idiomas disponibles
6 Maintaining the Escape Hood
13
2. Inspect the regulator and hose.
a. Look for cuts, cracks or other damage.
b. Check the hood to be sure you can see clearly through it.
c. Check the elastic neck band for breaks. Stretch and release it. The neck
band must spring back easily.
3. Inspect the Carrier (and Optional Shoulder Strap, if provided)
a. Look for tears, cuts and abrasions.
b. Check the straps and strap hardware.
• All D-rings and the strap hooks must be present and undamaged.
• Check that the adjusting buckle slides easily, allowing full adjustment of the
strap.
4. Inspect the cylinder valve .
a. Look for broken or bent parts on the handwheel and pressure gauge
b. Open and close the valve to be sure it works properly.
c. Inspect the pressure gauge:
▪ The lens must not be cracked or broken.
▪ The gauge face must be visible without distortion.
▪ The gauge needle must operate.
US
Publicidad
