Publicidad
Idiomas disponibles
Idiomas disponibles
6.3
Hood Packing Instructions for TransAire Apparatus
US
5. Inspect the cylinder at least monthly or before each use, to be sure it is FULL
(2216 or 3000psi on the pressure gauge).
1. .Lay the hood flat and fold in thirds lengthwise
2. Fold the top third of the hood over.
3. Put the hood inlet assembly outside of the hood.
4. Place the hood into the pouch on the carrier by first inserting the tube into the
pouch, followed by the folded hood. Leave the hood inlet assembly exposed.
5. Waist-Mounted (using the optional shoulder strap)
6 Maintaining the Escape Hood
14
Publicidad
