Publicidad
Idiomas disponibles
Idiomas disponibles
After a hybrid cleaning cycle
•
Take care when opening the door after a Hybrid cleaning procedure has
ended. The water on the bottom is hot.
•
Open the oven door and remove the remaining water with a sponge. Do not
leave the residual water in the oven for any length of time. Wipe the oven
clean and dry with a soft cloth. Do not forget to wipe under the oven door
seal.
•
Use a detergent-soaked sponge, a soft brush, or a nylon scrubber to wipe the
oven interior. Remove stubborn residue with a nylon scourer. You can remove
lime deposits with a cloth soaked in vinegar.
•
If the oven remains dirty, you can repeat the procedure once the oven has
cooled.
•
For heavy residue, such as grease left over from roasting, we recommend
that you rub detergent into the residue before activating the Hybrid cleaning
function.
•
After cleaning, leave the oven door open at a 15° angle to allow the interior
enamel surface to dry thoroughly.
NOTE
You will not be able to start a Hybrid cleaning cycle if the Control Lockout
•
feature is activated or if the oven's temperature is too hot.
•
The lower oven door locks automatically. The display will show the cleaning
time remaining. You cannot open the lower oven door until the temperature
drops to a safe/cool temperature.
•
The Hybrid clean feature can be used only on the lower oven. While the Lower
oven is in Hybrid cleaning mode, you cannot use the Microwave for cooking.
•
If the oven is not clean after one cycle, repeat the cycle.
•
You cannot set the oven for cooking until the oven is cool enough for the door
to unlock.
NQ70M9770D_AA_DE68-04503A-02_EN+MES+CFR.indb 69
Descale
If you use Steam Bake or Steam Roast functions frequently, we recommend
descaling regularly to remove minerals from the oven that may affect the taste or
quality of food cooked. When running a descaling cycle, use only descaling agents
that are specific to steam ovens or coffee machines.
NOTE
If you use Steam Bake or Steam Roast functions for more than a total of 12 hours,
the Descale indicator turns on. You can still enable the Steam Bake or Steam Roast
functions for the next two hours without descaling. However, after those two
hours are up, the Steam Bake or Steam Roast functions will be disabled until you
run a descaling cycle.
How to run a descale cycle
1.
4:35 PM
LOWER
Clean
2.
Self clean
Hybrid Clean
Descale
Draining
3.
4:35 PM
LOWER
Descale
Please descale Water Reservoir to improve quality.
Clean Time
START
3hr 00min
Turn the mode knob to Clean. The
display will show 4 cleaning selections.
Tap Descale.
Tap START.
English 69
2018-10-05
4:17:21
Publicidad
