Publicidad
Idiomas disponibles
Idiomas disponibles
CONTROL: TLW4 WIRELESS REMOTE CONTROL
MODE SETTING
FAN SPEED SETTING
SWING/LOUVER SEETING
LOCK SETTING
SLEEP SETTING
POWER BUTTON
TEMPERATURE BOTTON
MODE BUTTON
TIMER ON BUTTON
SLEEP BUTTON
DISPLAY BUTTON
POWER ON/OFF
Press the POWER
button to switch the air-conditioner on or off. When turned on, the system will operate according to the set-
ting shown on the remote unit.
MODE
By pressing the MODE key, the air conditioner can be set in
•
5 operating modes (fan, cool, dry, heat, auto)
The LCD screen on the remote control shows FAN, COOL, DRY, HEAT or AUTO depending on the mode selected. The system will work as the
set mode after no mode is changed for 3 seconds.
FAN
Press FAN
button to select the fan speed (auto, low, medium or high speed). The display on the Remote unit will show the
status. While auto speed is set, the fan speed (high, medium, low) will be changed automatically according to the system calcula-
tion. The indoor fan will work according to the set speed after no fan speed is changed for 2 seconds.
NB:
1.
the FAN button cannot be used in DRY mode.
2.
The Auto Fan will be disabled in Fan mode (can be set but main unit will not response).
3.
The indoor fan may not work as setting if some functions or protections are occurring.
SETTING THE TEMPERATURE
The temperature can be set within a range of 15-30°C.
Press
or
to increase or decrease the setting in steps of 1°C. The LCD on the remote unit will show the setting tempera-
ture.
The temperature setting function is disabled in FAN mode.
Auto
Auto
MODE
SLEEP
CLOCK
LIGHT
SET
LIGHT
POWER OFF
POWER OFF
F
TEMP SETTING
C
TIMER SETTING
SEND INDICATOR
FAN BUTTON
SEND BUTTON
SEND
ON
LOUVER BUTTON
OFF
TIMER OFF BUTTON
SWING BUTTON
LOCK BUTTON
SET BUTTON
LOW → MED → HIGH → AUTO
POWER ON
POWER ON
COLD
COLD
POWER ON
POWER ON
35
Publicidad
