Maintenance And Service Instructions; Cleaning; Repair Service; Warranty - stayer BJ120 Manual De Instrucciones

Selecting the cookie.
(see figure 9)
Milling narrow workpieces
Always use the top of vertical adjustment for milling
narrow parts 9. Note that the width marks Maximum drill
10 are not housed outside the workpiece work.

5. Maintenance and service instructions

5.1 Cleaning and Maintenance
Before any work on the tool power, remove the
plug from the outlet.
Keep the power tool and cooling vents to work
effectively and safety.
Clean and oil the guides whenever necessary. use only oil
not forming resin (eg oil sewing machine).
Resetting the clamping lever If it must be you. Readjust
the clamping force levers 3 and 12. For this, loosen the
levers tightening and desatorníllelas.
Mount the clamping levers rotated at least 30°
counterclockwise to clockwise and then screw them.
Replacing a damaged cable should be performed by
Stayer or a technical service Power Tool Stayer authorized
to to ensure the safety of the appliance.

5.2 Repair service

Our after-sales service responds to your questions
conceming maintenance and repair ofyour product as well
as spare parts.
Exploded views and information on spare parts can also
be found under: info@grupostayer.com
Our customer consultants answer your questions
conceming best buy, application and adjustment of
productsand accessories.

5.3 Warranty

Warranty card
lncluded in the documentation that accompanies this
equipment, you should find the warranty card. You should
fill out the card completely and retum to vendar with a copy
of purchasing receipt or invoice and you should receive a
receipt.
Note: lf you cannot find the warranty card
within the documentation,youmust ask for it
through your supplier.
The warranty is limited only to manufacturing defects and
expire if pieces have been removed or manipulated or
repaired otherthan themanufacturer.
ENGLISH
19

5.4 Disposal and recycling

We recommend that the power tools, accessories and
packaging are subject to a recovery process that respects
the environment.
Only for EU countries:
Do not dispose of power tools into household waste!
According the European Guideline 2002/96/
EC for Waste Electrical and Electronic
Equipment and its implementation into national
right,power tools that are no longer usable
must be collected separately and disposed of
in an environmentally correct manner.
Subject to change wlthout notlce.

6. Regulations

6.1 Technical Data

= Power
= Giros empty
= Vertical adjustment
= Diameter of strawberry
ANGLED
CUTS
= Court inclined
0-90º = Depth of cut
= Weight
kg
= Protection class
LWA = Sound power level
LPA = Sound pressure level
= Vibrations
The values givenarevalid for nominalvoltages [U]230/240
V-50/60 Hz - 110/120 V - 60Hz. For lower voltage and
models for specific countries, these values can vary.
Please observe the article number on the type plata of
your machine.The trade names of the individual machines
may vary.
NoiseNibration lnformation
Noise determined according to EN 60745.
The typical sound pressure level of appliance determined
with a filter A product are: Sound pressure level 88 dB(A);
sound power level 99 dB(A). Tolerance K=3 dB
19