Technical Data; Disposal And Recycling - stayer SUH 2000 E Manual De Instrucciones

Maintenance
The tool has been designed to operate over a long
period of time with a minimum of maintenance.
Continuous satisfactorily operation depends upon
proper tool care and regular cleaning.
Regularly clean the ventilation slots with a clean, dry
paint brush.
To clean the tool, use only mild soap and a damp cloth.
Never let any liquid get inside the tool and never
immerse any part of the tool into liquid.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted: Safely dispose
of the old plug.
Connect the brown lead to the live terminal in the new
plug.
Connect the blue lead to the neutral terminal.
Connect the green/yellow lead to the earth terminal.
Warning! Follow the fitting instructions supplied with
good quality plugs. Recommended fuse: 13 A.

TECHNICAL DATA

The values given are valid for nominal voltages [U] of
230/240 V ~ 50/60 Hz - 110/120 V ~ 60 Hz. For lower
voltage and models for specific countries, these
values can vary.
Please observe the article number on the type pl ate
of your machine. The trade names of the individual
machines may vary.
LPA (sound pressure) 75 dB(A), hand/arm weighted
vibration <2,5 m/s²

DISPOSAL AND RECYCLING

The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
OnlyforEC countries:
Do not dispose of power tools into household waste!
According the European Guideline
2012/19/UE for Waste Electrical and
Electronic
implementation
right,power tools that are no longer
usable must be collected separately
and disposed of in an environmentally
correct manner.
Subject to change wlthout notlce.
Equipment and its
into national
- 19 -
es
it
gb
de
fr
p
pl
el