Kuppersbusch KI6130.0SE Instrucciones De Uso página 17

EN
Pans
Only ferromagnetic pans are suitable
for use with an induction hob.
There are several types:
use with induction hobs.
We do not recommend the use of
Each cooking zone has a minimum
pan detection time. This depends on
the material and the ferromagnetic
diameter of the base of the pan.
Therefore it is essential to use the
cooking zone that best matches the
diameter of the base of the pan to
be used.
If the pan is not detected on the
next smallest zone.
When the Flex Zone is used as a
suitable for this type of zone can be
Some pans without a complete
ferromagnetic base are sold as
base is heated. Consequently the
heat is not evenly distributed across
the base of the pan. This may mean
that the non-ferromagnetic part of the
base of the pan does not reach the
right cooking temperature.
16
in the base have a smaller area of
ferromagnetic material (see fig.5).
even impossible to detect the pan. In
not heat up correctly.
The type of base used on the pan
of the cooking. Pans with a stainless
steel "sandwich" base use materials
that assist the uniform distribution
savings in time and energy
The base of the pan must be
heat up quickly without allowing time
for the automatic disconnection
function of the cooker to come into
operation.
I M P O R T A N T
Use vessels with the same base
diameter as that of the cooking zone.
In the cooking zones closest to the
within the cooking marks indicated on
the glass surface and use vessels of
the same or smaller diameter to these.
This will help to prevent overheating in
the control zone.
Use the rear cooking zones for
intensive use of the appliance. This
will help to prevent overheating of the
control panel.
Do not allow the vessels to invade the
cooking.
Maintenance
HANDLING ELEMENTS
2 Cursor slider for controlling power.
Power and/or residual heat
Decimal dot of power and/of
residual heat indicator.
Direct access to "Power" function.
Activation sensor for "Block"
function.
Pilot indicator light "Block"
Activation sensor for "Stop&Go"
function.
Pilot indicator light "Stop&Go"
"Minus" sensor for timer.
"Plus" sensor for timer.
Timer indicator.