Publicidad
Idiomas disponibles
Idiomas disponibles
EN
brightness of indicator will increase.
2 Using the touch key
choose the desired power level.
The
and
so if you keep them pressed they
increase or decrease with a 0.5 second
interval.
Only one hot plate can be selected at
the same time
Warning:
To operate a hot plate, it must
use a hot plate,check the brightness
of the power indicator.After
choosing hot plate, brightness of
power indicator should increase.
Quick switch-on at maximum power:
press the touch key
(4) once. The
hot plate will be activated at
full power.
SWITCHING OFF THE HOT PLATE
1 The hot plate must previously be
selected.
2 Using the touch key
power level to 0.
ii) When you press touch keys
RESIDUAL HEAT INDICATOR
The power indicator of the hot plate will
display an H when the glass surface
reaches a temperature that could
cause burning.
ii) or displays 0 (if the appliance is still
running).
34
or
Warning:
in a short time on the power display.
This showing is related with setup
operation and it does not mean the
cooking zone is hot.
Warning:
H indication is used for the safety
purposes in any case. Even if the
power on, H indication appears.
SWITCHING OFF THE DEVICE
time by pressing the general on/off
touch key
H will appear in the zones that are hot.
The rest of the displays will not light up.
Double/triple burner hot
double/triple burner hot plate offers
the possibility of using the inside ring
depending on the size of the pot or pan.
SWITCHING ON THE Double/Triple
HOT PLATE
1 The related hot plate must be
selected.
2 Select the desired power (from 1 to 9)
using the touch key
3 Press the double/triple hot plate
and
touch key
double/triple burner. When the
double/triple zone indicator (8) light
on.
SWITCHING OFF THE Double/Triple
HOT PLATE
1
burner hot plate was switced on
previously is selected.
2
Press the double/triple hot plate
touch key
double/triple burner. The double/
(1). In standby mode an
plate
or
(4/5).
(6) to activate the
(6)
to deactivate the
and the outer ring will be deactivated
Locking of the touch keys
of the cooking hob
To prevent undesired manipulation you
key
(7). This function is useful for
child safety. Touch the locking sensor
more than 3 seconds. When the lock
comes on.
the lock is activated (the lock indicator
light (9) on).
(1) to be used.
the locking touch key for more than 3
seconds (7) once again. Lock indicator
ready for use.
CHILD LOCK (depending on model)
complicated than key lock. User can
activate key lock via one sensor. But
child lock need a sensor sequence.
The Child Lock is being used to prevent
children from turning on the hob.
Activating Child Lock :
1. The hob is switched on via
2. Any zone should not be selected.
(5) Increase power touch key
and
(4) decrease power touch
key and minus sensors is hold for 3
seconds at same time. At the end of
heard
3.
touch key is touched (there is no
need to keep press for a long time)
and a long buzzer sound is heard
and the Child Lock will be activated
(1) On/
(7) locking
Publicidad
