Grant GR150 Manual De Operación página 22

3.7.2. Pump: (GP200 only).
Press "S" to enter edit Pump Rate mode. The LCD flashes to indicate the rate can be
changed. Rotate the navigation control to change to the required value. Press "S" to return to
Pump display with new rate. offset Press "F" to return to main menu. Press "F" again to return
to "Home" display.
3.7.3. Set Liquid:
On selecting Set Liquid in main menu with the navigation control, press "S" to enter liquid
select menu. There are selections available, Water, Water glycol mix, Low temperature oil and
High temperature oil. (See 3.2 for liquid use). Rotate the navigation control to select the
required liquid then press "S" to return to the home display with this setting for liquid. Pressing
"F" returns to "Home display with no change.
GR150, GP200
Operating Manual
F
S
Pump rate ** %
ADJUS T
S
* * %
F
ACCEPT
S
Water
Water/
Glycol
Low T emp
Oil
High T emp
Oil
www.grant.co.uk
S
S
F
17091 Version 12 - October 2009 75T
EN
Page 20