Publicidad
Idiomas disponibles
Idiomas disponibles
Description
The TF Series Trailed Feeders are designed for feeding livestock, through deposition of pre-defined drops of feed, onto clear ground.
The TF Series operate with an electric motor mechanism, ensuring accurate disposition, and industry leading ground clearance. Components are
suitable IP rated for use in wet wintry conditions.
These machines should only be used to perform tasks for which they were designed - use of the machine for any other function may be both
dangerous to persons, and potentially damaging to components. Use of the machine beyond the stated usage may invalidate any applicable
warranty, as well as being potential in breach of applicable safety regulations.
Identification
Each machine is fitted with a serial plate (shown below) which details the
following:
1.
Model
2.
Date of Manufacture (DOM)
3.
Serial Number
4.
Mass
When enquiring regarding spares or additional equipment, ensure you have
this information to hand.
Implement Decals
If your implement does not contain all of the decals shown below, please
contact Chapman Machinery for replacement decals before use. Note: All
decals must be present and visible. It is imperative that these are replaced
if damaged to prevent potential harm to users.
CAUTION - Read operators
manual before handling this
machine. Observe
instructions and safety rules
when operating.
Component Identification
1)
PVC Tonneau Cover
2)
Hopper
3)
Nudge Bar
4)
Mudguards
5)
Drop Size Adjuster
6)
Drawbar
WARNING- Entanglement
Hazard. Keep hands away
from moving parts
Page 3
English
Publicidad
