Descargar Imprimir esta página

Maytag Precision Touch 850 Serie Guía De Uso Y Cuidado página 25

Estufa a gas con horno doble
Ocultar thumbs Ver también para Precision Touch 850 Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting
For most concerns, try these first.
• Check if oven controls have been properly set.
• Check to be sure plug is securely inserted into receptacle.
• Check or re-set circuit breaker. Check or replace fuse.
• Check power or gas supply.
Surface burner fails to light.
• Check to be sure unit is properly connected to power supply.
• Check for a blown circuit fuse or a tripped main circuit breaker.
• Check to be sure ignitor is dry and clicking. Burner will not light if ignitor is damaged,
soiled or wet. If ignitor doesn't click, turn control knob OFF.
• Burner ports may be clogged.
The flame is uneven.
• Burner ports may be clogged.
Surface burner flame lifts
• Check to be sure a pan is sitting on the grate above.
off ports.
Clock, icons and/or
• Oven may be set for a Cook & Hold or Delay function
lights operate but oven does
• The Oven Control Lockout may have been set. (See page 9.)
not heat.
Oven light and/or clock
• The light bulb is loose or defective.
does not function.
• The oven light does not work during self-cleaning process.
• Oven may be in Sabbath Mode. (See page 15.]
Baking results are not as
expected or differ from
previous oven.
Food is not broiling properly or
smokes excessively.
Check the oven temperature selected. Make sure oven is preheated when recipe
or directions recommend preheat.
Make sure the oven vent has not been blocked. See page 16 for location.
Check to make sure range is level.
Temperatures often vary between a new oven and an old one. As ovens age, the oven
temperature often "drifts" and may become hotter or cooler. See page 15 for
instructions on adjusting the oven temperature. Note: It is not recommended to
adjust the temperature if only one or two recipes are in question.
Use correct pan. Dark pans produce dark browning. Shiny pans produce light
browning.
Check rack positions and pan placement. Allow 1-2 inches between pans and oven
wall.
Check the use of foil in the oven. Never use foil to cover an entire oven rack. Place
a small piece of foil on the rack below the pan to catch spillovers.
Check oven rack positions. Food may be too close to flame.
Aluminum foil was incorrectly used. Never line the broiler insert with foil.
Trim excess fat from meat before broiling.
A soiled broiler pan was used.
Preheat oven for 5 minutes before placing food in the oven.
Broil with the oven door closed.
24

Publicidad

loading