Dreame H12 Dual Manual De Usuario página 9

How to Use
EN
Self-cleaning Mode
1. Place the appliance back onto the base while you finish cleaning.
2. Briefly press the self-cleaning button
cleaning.
3. Empty the Used Water Tank while self-cleaning is completed. Then the appliance
starts drying mode. Press the button
Note: The self-cleaning mode can be enabled only when the appliance is being charged and the battery level is
more than 15%.
Drying Mode
1. Press and hold the self-cleaning button
2. The appliance will be charged once drying is completed.
Minimum Water Level
自清洁水位线
of Self-Cleaning
Note:
•
Clean the charging base if there are any stains left on the base after self-cleaning is complete.
•
If cleaning the brush roller manually, please air dry thoroughly or dry it by using drying mode several times.
11 11
on the top of the handle to start/stop self-
to exit drying mode.
for 3 seconds to activate drying mode.
How to Use
Using as a Handheld Vacuum
1. Press the handvac release button to remove the handvac.
2. Install the dust cup assembly and other attachments as shown in the diagram until
you hear a click.
3. Briefly press the handvac power switch
mode switch to switch between Standard mode and Turbo mode according to your
needs.
1
2
咔哒
Click
to start operating. Briefly press the handvac
咔哒
Click
咔哒
Click
Note: Motorized mini-brush should not be used with
the extension rod.
EN
12 12