Publicidad
Idiomas disponibles
Idiomas disponibles
5. Operation
5-1. User setup
The ICD-879 series camera has provision of camera setup and memory function
for camera ID setting, sync system selection, various picture quality setups for
optimum reproduction. Back light compensation spot area setting, Privacy Mask
settings, Day/Night change-over thresh-hold settings.
The SETUP MENU is shown in the system flow tree, and the settings can be easily
executed using the On-Screen-Menu system. Alteration of these functions may be
needed for some installations and we recommend that you should spend some
time to become acquainted with these functions so that the best results can be
obtained from this high performance TV camera.
5-2. SETUP switches and functions
FOCUS EZ
SET UP
U
L L
R
D
E
Up Switch (U)
Down Switch (D)
Right Switch (R)
Left Switch (L)
Enter Switch (E)
* To enter the setup mode, hold down the E button longer than 2 seconds.
The pushbuttons and the markings at left are provided on
the rear panel of the camera.
To be used for a selection of SETUP parameters
(up and down).
To be used to change the settings.
To be used to enter or quit the setup mode and to
save the setup data.
E-9
Publicidad
