Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
WARNING:
Do not allow familiarity with tools to make you
careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
WARNING:
Always wear eye protection with side shields
marked to comply with ANSI Z87.1 along with
hearing and breathing protection. Failure to do so
could result in objects being thrown into your eyes,
resulting in possible serious injury.
WARNING:
Do not use any attachments or accessories
not recommended by the manufacturer of this
tool. The use of attachments or accessories not
recommended can result in serious personal injury.
APPLICATIONS
This saw is designed to cut man-made tile, stone tile, and
pavers up to 4 in. maximum thickness in two passes.
You may use this tool for the purposes listed below:
„ Straight line cutting operations such as cross cutting,
mitering, ripping, plunging, and beveling
„ Cutting garden stone
ON/OFF SWITCH
See Figure 24.
To turn your saw on:
„ Lift the switch to turn on.
To turn your saw off:
„ Press the switch down to turn off.
To lock your saw:
„ With the saw turned off, install a padlock (not included)
through the hole in the switch.
SWITCH
OFF
PADLOCK
ON/ OFF
SWITCH
WARNING:
In the event of a power failure or when the tool is
not in use, turn the on/off switch off. This action
will prevent the tool from accidentally starting when
power returns.
WARNING:
ALWAYS make sure your workpiece is not in
contact with the cutting wheel before operating the
switch to start the tool. Failure to heed this warning
can cause the workpiece to be kicked back toward
the operator and result in serious personal injury.
WARNING:
To reduce the risk of accidental starting, ALWAYS
make sure the on/off switch is in the off position
before plugging tool into the power source.
19 — English
SWITCH
ON
Fig. 24
Publicidad
